Subscribe to Our Youtube Channel
Related Manuals for SEWOO SLK-D10
Summary of Contents for SEWOO SLK-D10
- Page 1 Aroot Co., Ltd. 28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi- do, 18103, Republic of Korea TEL : +82-31-8077-5000 / FAX : +82-31-624-5310 http://www.miniprinter.com D10 Rev. G 07/2020...
- Page 2 MODEL : SLK-D10 Mini Dot Impact Printer User’s Manual All specifications are subject to change without notice...
- Page 3 This device co mplies with part 15 of the FCC Rules. Operation is subject to the following two conditions. 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Vic Barczyk 20280 S.
- Page 4 Disposal of Old Electrical&Electronic Equipment(Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronics equipment.
-
Page 5: Table Of Contents
Table of Contents 1. Features 2. Specification 3. Self Test 4. Configuration Setup 5. User Switches 5.1. Panel Switches 5.2. Power Switch 5.3. Indicators 6. Command List 6.1. EMULATION EPSON TM-U200 6.2. EMULATION CITIZEN iDP-3540 6.3. EMULATION VERIFONE 900 6.4. EMULATION STAR SP200 7. -
Page 6: Features
1. Features y Power Supply Requirements Either input 120VAC/Output 24VDC 2.5A for North America or Input 230VAC/Output 24VDC 2.5A for Europe with a 3pin mini-din connector power supply is provided. y Dip Switch Configuration Emulation mode, CPL Select mode, Flow Control mode, Data Width/Parity, and Baud Rate are all configured through dip switch settings. -
Page 7: Specification
2. Specification Printer Specifications SLK-D10 MODEL 9-pin serial impact dot matrix PRINT METHOD Bi-directional (with logical seeking) PRINT DIRECTION Epson Mode : 42/35, 40/33, Star Sp-200 : 42/35 Other Modes : 40/32 NO. OF COLUMNS 320 dots 400 dots NO. OF DOTS/LINE... - Page 8 Overall dimension...
-
Page 9: Self Test
3. Self Test 1 While pressing the paper FEED switch after the printer in turned on the self test mode is initiated. The printer self test includes a listing of the current default settings and Dip Switch information. 2 While pressing the paper BACK switch after the printer in turned on the self test mode is initiated. -
Page 10: Configuration Setup
4. Configuration Setup When the paper FEED switch is pressed and released instantly as the power is applied to the printer, the printer will print the current printer configuration settings along with the DIP switch information. If the printer setup needs to be changed, turn the Power Off before changing the setting. -
Page 11: User Switches
5. User Switches 5.1. Panel Switches FEED button Advance media in line feed increments if the FEED switch is pressed momentarily. If the FEED switch is pressed for more than 1 seconds, the media will advance continuously until the switch is released. BACK button Feed the media back in each line increment until 20 lines back if the BACK switch is pressed momentarily. -
Page 12: Command List
6. Command List 6.1. EMULATION EPSON TM-U200 Command Hex Code Description <09>H Horizontal tab <0A>H Print and line feed <0D>H Carriage Return DLE EOT <10>H<04>H<n> Real-time status transmission DLE ENQ <10>H<05>H<n> Real-time request to printer ESC SP <1B>H<20>H<n> Set right-side character spacing ESC ! <1B>H<21>H<n>... -
Page 13: Emulation Citizen Idp-3540
6.2. EMULATION CITIZEN iDP-3540 Command Hex Code Description <07>H Drive pulse setting command for 1st drawer <08>H Clear data in buffer <0A>H Paper feed <0C>H<n> Paper feed n lines <0D>H Print command <0E>H Select expanded character mode <0F>H Select normal character mode <11>H Initial set command <12>H... -
Page 14: Emulation Verifone 900
6.3. EMULATION VERIFONE 900 Command Hex Code Description <00>H Pad character <18>H Empty print buffer and cancel character attributes <0A>H Print and feed one line <0C>H Print data in buffer and eject paper to 1.2 <0D>H Line feed <12>H Change ribbon color <1E>H Set double width mode or <0E>H... -
Page 15: Emulation Star Sp200
6.4. EMULATION STAR SP200 Command Hex Code Description Differed drive command “A” for peripheral <07>H unit (Default setting) <18>H Cancel print data in buffer <0A>H Line feed <0D>H Line feed (same as LF) <0E>H Select expanded character mode <0F>H Cancel expanded character mode Immediate drive command “B”... -
Page 16: Interface
7. Interface The tables below describe the type of socket and the function of each pin. D-SUB 25 Female Serial Port D-SUB 25 Male Parallel Port D-SUB Centronics Parallel Port D-SUB 9 Female Serial + MSR Port... -
Page 17: Serial Interface
7.1. Serial interface 7.1.1. D-SUB 25Pin Serial Port SIGNAL DESCRIPTION Output Printer transmit data line RS-232C level Input Printer receive data line RS-232C level 4, 20 Output Printer handshake to host line RS-232C level Input Data Send Ready 1, 7 System Ground 7.1.2. -
Page 18: Parallel Interface
7.2.Parallel interface 7.2.1. D-SUB 25Pin Parallel Port SIGNAL DESCRIPTION STROBE- Input Synchronize signal Data received DATA0-7 Input Data bit Transmitted 0 – 7 ACK- Output Data receiving competed BUSY Output Impossible to printer data receiving Output Paper empty SELECT Output Printer’s status for ON/OFF line AUTO FD- Input... -
Page 19: Cash Drawer Connector
8. Cash Drawer Connector The printer can operate two cash drawers with a 6 pin RJ-11 modular connector. The driver is capable of supplying a maximum current of 1.0Amp at 24VDC for 510ms or less, when not printing. Cash Drawer Connector SIGNAL DESCRIPTION Signal GND... -
Page 20: Power Supply
9. Power Supply 24VDC±10% Power Supply Voltage 1.75A or more Power Supply Current Power Supply Connector... -
Page 21: Dip Switch Settings
10. Dip Switch Settings This table gives the definition for the DIP switch settings. 10.1. External Dip Switch Factory Function Setting setting Epson TM-U200 Citizen iDP3540 Epson Emulation (*1) (TM-300) (OFF) TM-U200 (Star SP200) (ON) CR Only CR only CR + LF 40/33 Char/Line 40/33 Char/Line... - Page 22 10.2. Internal Dip Switch Function Setting Roll Type Paper Type Sprocket Type Not Install Two Color Install Wansung Hangul Johap Epson TM-U200/Citizen iDP-3540 Emulation Epson TM-300/STAR SP-200...
- Page 23 MEMO...
Need help?
Do you have a question about the SLK-D10 and is the answer not in the manual?
Questions and answers