Optional Glass Stand Installation - Napoleon JAYDEN NEFL50B-CTC Installation And Operation Manual

installation
EN

3.2.2 optional glass stand installation

B
X5
E
Place appliance on a soft clean surface.
A.
Remove the four screws from the bottom of the appliance as shown in Figure 1. Do not throw away
B.
screws.
Using the same screws, align the center stand piece to the bottom holes and secure it into the appliance
C.
as shown in Figure 2.
Prepare the glass base and ensure that the rubber feet of the glass base are facing away of the appliance
D.
as shown in Figure 3.
Using the 5 screws included in the kit, secure the glass base into the center piece.
E.
Check if the glass stand is secured properly. Ensure appliance is standing straight and still.
F.
Fig. 1
Fig. 3
10
W415-1717 / 02.28.17
C
A
B
A
B
D
D
X1
Fig. 2
Fig. 4
C
C
E
E
X1