Specification - Masalta EMR70H Instruction Manual

Storage
Rammer should be stored in such position as it is placed on level, after engine and machine have
been cooled down. Be sure to secure the rammer as necessary to avoid falling down. If the rammer
has to be laid down inevitably, tighten fuel tank cap and engine oil plug securely and wait until engine
and machine are cooled down. After laying it down, make sure that there is no leak of fuel or oil. (If
fuel leaks, drain the tank)
Long-Term Storage
l
Drain fuel from fuel tank, fuel line and carburetor.
l
Remove spark plug and pour a few drops of motor oil into cylinder. Crank engine 3 to 4 times so
that oil reaches all internal parts.
l
Clean exterior with a cloth soaked in clean oil.
l
Store unit covered with plastic sheet in moisture free and dust free location out of direct sunlight.
Model
Motor
Power kW (hp)
Operation Mass kg (lb)
Impact Force kN
Jumping Stroke mm
Fuel Tank Capacity L
Shoe Size mm
Acoustic Noise (According to 2000/14/EC)
Measured sound power level
Guaranteed sound power level
Working Size (L x W x H): 689X440X1080 mm
Hand-Arm vibration Specification (According to ISO 5394, EN 1033 and EN500-4): 7.2m/s

Specification

EMR70H
Honda GX160
4.0 (5.5)
70 (154)
14
50-80
2.8
350X285
EMR70H
105dB
107dB
9
2