Specification - Masalta EMR75M Instruction Manual

Storage
Rammer should be stored in such position as it is placed on level, after engine and machine have
been cooled down. Be sure to secure the rammer as necessary to avoid falling down. If the rammer
has to be laid down inevitably, tighten fuel tank cap and engine oil plug securely and wait until engine
and machine are cooled down. After laying it down, make sure that there is no leak of fuel or oil. (If
fuel leaks, drain the tank)
Long-Term Storage

Drain fuel from fuel tank, fuel line and carburetor.

Remove spark plug and pour a few drops of motor oil into cylinder. Crank engine 3 to 4 times so
that oil reaches all internal parts.

Clean exterior with a cloth soaked in clean oil.

Store unit covered with plastic sheet in moisture free and dust free location out of direct sunlight.
Model
Motor
Power kW (hp)
Operation Mass kg (lb)
Impact Force kN
Jumping Stroke mm
Fuel Tank Capacity l
Shoe Size mm
Acoustic Noise (According to 2000/14/EC)
Measured sound power level
Guaranteed sound power level
Sound Power Level Limit
Working Size (L x W x H):
MR60R: 710 x 440 x 1060 mm
MR65R: 710 x 440 x 1060 mm
MR75R: 760 x 430 x 1020 mm
EMR75M: 760 x 430 x 1020 mm

Specification

MR60R MR65R
Robin EH09 Robin ER12
2.1 (2.8) 2.9 (4.0)
60 (132) 65 (143)
10.7 13
50-85 40-80
2.8
2.8
335x265 330x285
MR60R
103dB
104dB
108dB
9
MR75R
Robin EH12-2D
3.0 (4.0)
75 (165)
13.8
40-80
2.8
330x285
MR75R MR75R
103dB 103dB
104dB 104dB
108dB 108dB
EMR75M
MG165
3.2(4.3)
74 (163)
13.8
40-80
2.8
330x285
EMR75M
103dB
104dB
108dB