FujiFilm X100V Owner's Manual page 330

Connections
Problem Problem
The monitor is blank.
Both the TV and camera
monitor are blank.
No picture or sound
on TV.
The computer does not
recognize the camera.
FUJIFILM X RAW STUDIO
or FUJIFILM X Acquire
fails to correctly detect
the camera.
Cannot connect to
iPhones or iPads.
Cannot connect to
smartphone.
12
310
The camera is connected to a TV: Pictures will be displayed on
the TV instead of in the camera monitor (P 272).
EYE SENSOR is selected for VIEW MODE SETTING >
PLAYBACK: Put your eye to the viewfi nder or choose a
diff erent VIEW MODE SETTING option (P 207).
•
The camera is not properly connected: Connect the camera
properly (P 272).
•
Input on the television is set to "TV": Set input to "HDMI"
(P 272).
•
The volume on the TV is too low: Use the controls on the tele-
vision to adjust the volume (P 272).
Be sure the camera and computer are correctly connected
(P 277).
Check the option selected for PC CONNECTION MODE
on the camera. Select USB RAW CONV./BACKUP
RESTORE before connecting the USB cable (P 284).
ON is selected for USB POWER SUPPLY SETTING. Se-
lect OFF when the camera is connected via a Lightning
connection to a device that do not supply power (P 240).
Confi rm that the camera is correctly connected: The procedure
for connecting the camera varies with the type of connec-
tor with which the smartphone is equipped (P 281).
Solution Solution