FujiFilm X100V Owner's Manual page 274

AF-ON
If AF-ON is selected, you can press the control instead of keeping
the shutter button pressed halfway.
MODELING FLASH
If MODELING FLASH is selected when a compatible shoe-mount-
ed fl ash unit is attached, you can press the control to test-fi re the
fl ash and check for shadows and the like (modeling fl ash).
TTL-LOCK
If TTL-LOCK is selected, you can press the control to lock fl ash
output according to the option selected for F FLASH SETTING >
TTL-LOCK MODE (P 153).
n FACE SELECT op
n FACE SELECT op can be enabled
or disabled by pressing the button to
which n FACE SELECT op is assigned.
Enabling n FACE SELECT op allows
the focus stick (focus lever) or (during
viewfi nder photography) touch controls
(P 24) to be used to select the face
that will be used for focus.
The following features can be accessed using the focus stick or
during viewfi nder photography when n FACE SELECT op is
9
enabled:
•
The face used to set focus can be selected using the focus stick.
To switch from face detection to manual focus-area selection,
press the center of the focus stick (focus lever) (P 70). Press
again to re-enable face detection.
•
The touch screen (monitor) or focus stick can be used to select
the face used to set focus during viewfi nder photography.
254
The Fn (Function) Buttons
FACE SELECT ON