Sunnydaze Decor SSS-220 Manual

Sunnydaze Decor SSS-220 Manual

Stacked rustic cascading whiskey barrel outdoor water fountain with led lights

Advertisement

STACKED RUSTIC CASCADING WHISKEY BARREL
OUTDOOR WATER FOUNTAIN WITH LED LIGHTS
Read assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Assemble components of this fountain on a soft, clean surface to avoid scratching or damaging the finish.
Parts
Barrel Topper
Barrel Fountain
Access Panel Cover
Electric Submersible Pump
Adapter Cord

ASSEMBLY

1. Run the water tube that is connected to the fountain topper through the hole in the top of the barrel fountain and gently
place the topper onto the fountain, as shown.
2. Through the access panel in the back of the fountain, attach the pump to the water tube.
3. Securely connect the short cable on the pump to the light cable inside the fountain. Place the pump inside the fountain and
run the long pump cable through the access panel.
4. Slide the access panel cover over the opening in the back of the fountain.
5. Securely connect the pump power cord to the adapter cord.
6. Fill the fountain with enough water to keep the pump fully submerged during operation; approximately 4 gallons.
7. Plug the power cord into a properly grounded GFCI outlet.
Note: When first used, there may be air in the pump. It may take several minutes for the air to escape and water begins to flow.
MZ13949GC
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerservice@serenityhealth.com, or via our contact us page at
SSS-220
Select a smooth, level surface to place the fountain.
Qty.
1
Ensure all parts are accounted for
1
before disposing of packaging.
1
NOTE:
The water tubing is built into the fountain topper. Take care when handling the water tube;
1
detaching the water tube from the fountain will damage the fountain and void the product warranty.
1
/
/
Order/Customer Reference Number:
12/2019
www.SerenityHealth.com/contact-us/
Page 1 / 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SSS-220 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sunnydaze Decor SSS-220

  • Page 1 Purchase Date: Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
  • Page 2 IMPORTANT INFORMATION USE & CARE • For outdoor use only. Some splashing is normal; adjust the flow rate on the pump if the water rate is too high. • Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it will burn out the motor.

Table of Contents