Fig. 38: Transporting And Turning Wall Insert - ABB HT608016 Operation Manual

Operation Manual / A170-M.. - A175-M..
9 Disassembly and assembly / 9.5 Removing the compressor casing
7. Pull out wall insert (77000).
Transporting and turning wall insert
Fig. 38: Transporting and turning wall insert
1. Fit support angle (90025) with bolts and nuts.
2. Carefully turn wall insert over support angle (90025) and place on supports.
Place wall insert such that lifting device (90190/90195) can be removed.
u
© Copyright 2021 ABB. All rights reserved. HZTL4033_EN Rev.H July 2021