Fig. 30: Transporting And Turning Wall Insert - ABB HT575199 Operation Manual

Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly / 8.5 Removing the compressor casing
Transporting and turning wall insert
Fig. 30: Transporting and turning wall insert
1. Fit support angle (90025) with bolts and nuts.
2. Carefully turn wall insert over support angle (90025) and place on supports.
NOTICE
Reusing the lifting device
Place wall insert such that lifting device (90190/90195) can be removed.
© Copyright 2017 ABB. All rights reserved. HZTL4033_DE Revision B December 2017