Installing The Air Inlets; Fig. 65: Installing The Air Suction Branch; Table 50: Tightening Torque (72027) - ABB HT608016 Operation Manual

Operation Manual / A170-M.. - A175-M..
9 Disassembly and assembly / 9.13 Installing the air inlets
9.13

Installing the air inlets

9.13.1 Installing the air suction branch
Fig. 65: Installing the air suction branch
Product
A175-M
A170-M
Table 50: Tightening torque (72027)
1. Loop lifting gear around air suction branch.
2. Fit air suction branch together with nuts (72027) and washer (72028). Observe tightening
torque.
Disconnect all air lines according to the instructions of the enginebuilder.
u
Dismantle insulation as far as necessary.
u
© Copyright 2021 ABB. All rights reserved.
Size Tightening torque [Nm]
M20
M18
HZTL4033_EN
220
170
Rev.H July 2021