When Installing The Control Pad And The Pen Stand - Epson EB-1460Ui Installation Manual

When installing the Control Pad and the Pen Stand

When installing the Control Pad, leave enough space around it to install/remove the cover or to connect/
disconnect cables easily as shown in the following figure.
When installing the Pen Stand next to the Control Pad, do not install it so that it covers the groove in the front
cover as shown in the following figure.
c
When installing the Touch Unit, do not install the Control Pad on the projection screen and the
surrouding area (shaded area in the following figure). Otherwise The Touch Unit will not operate
correctly.
27
Installation Guide
[Unit: mm]
[Unit: mm]