Adjusting The Position Of The Projector - Epson EB-1460Ui Installation Manual

Installation Guide
c
Connect the cables to the projector
"Connecting Devices"
s
Connect the power cord last.
Use commercially available M4 screws to secure peripheral devices and accessories such as external
tuners to the screw holes in the following figure.
Install the wireless LAN module supplied in the wireless LAN unit module slot.

Adjusting the Position of the Projector

• Do not make adjustments using the projector's Keystone function. Doing so may result in a reduction in image quality.
• When setting up multiple projectors using the batch setup function, perform the batch setup before adjusting the
projected image.
s "Batch Setup Function"
p.32
p.108
46