Advertisement
Available languages
Available languages
Problem
It does not rinse well.
Laundry became stiff after
washing. (**)
Laundry does not smell like the
softener. (**)
Detergent residue in the
detergent drawer. (**)
Too much foam forms in the
machine. (**)
Foam is overflowing from the
detergent drawer.
56 / EN
Reason
The amount, brand and storage conditions of the
detergent used are inappropriate.
Detergent is put in the wrong compartment.
Pump filter is clogged.
Drain hose is folded.
Insufficient amount of detergent is used.
Detergent is put in the wrong compartment.
Detergent might be mixed with the softener.
Detergent is put in the wrong compartment.
Detergent might be mixed with the softener.
Detergent is put in wet drawer.
Detergent has gotten damp.
Water pressure is low.
The detergent in the main wash compartment got
wet while taking in the prewash water. Holes of
the detergent compartment are blocked.
There is a problem with the detergent drawer valves. • Call the Authorised Service Agent.
Detergent might be mixed with the softener.
Regular drum cleaning is not applied.
Improper detergents for the washing machine are
being used.
Excessive amount of detergent is used.
Detergent was stored under improper conditions. • Store detergent in a closed and dry location.
Some meshed laundry such as tulle may foam too
much because of their texture.
Detergent is put in the wrong compartment.
Softener is being taken early.
Too much detergent is used.
Solution
• Use a detergent appropriate for the washing
machine and your laundry. Keep detergents
closed in an environment free of humidity and
do not expose them to excessive temperatures.
• If detergent is put in the prewash
compartment although prewash cycle is not
selected, machine can take this detergent
during rinsing or softener step. Put the
detergent in the correct compartment.
• Check the filter.
• Check the drain hose.
• Using insufficient amount of detergent for
the water hardness can cause the laundry to
become stiff in time. Use appropriate amount
of detergent according to the water hardness.
• If detergent is put in the prewash
compartment although prewash cycle is not
selected, machine can take this detergent
during rinsing or softener step. Put the
detergent in the correct compartment.
• Do not mix the softener with detergent.
Wash and clean the dispenser with hot water.
• If detergent is put in the prewash
compartment although prewash cycle is not
selected, machine can take this detergent
during rinsing or softener step. Wash and
clean the dispenser with hot water. Put the
detergent in the correct compartment.
• Do not mix the softener with detergent.
Wash and clean the dispenser with hot water.
• Dry the detergent drawer before putting in
detergent.
• Keep detergents closed in an environment
free of humidity and do not expose them to
excessive temperatures.
• Check the water pressure.
• Check the holes and clean if they are clogged.
• Do not mix the softener with detergent.
Wash and clean the dispenser with hot water.
• Clean the drum regularly. For this, please
see 4.4.2.
• Use detergents appropriate for the washing
machine.
• Use only sufficient amount of detergent.
Do not store in excessively hot places.
• Use smaller amounts of detergent for this
type of item.
• Put the detergent in the correct
compartment.
• There may be problem in the valves or in the
detergent dispenser. Call the Authorised
Service Agent.
• Mix 1 tablespoonful softener and ½ l water
and pour into the main wash compartment of
the detergent drawer.
• Put detergent into the machine suitable
for the programmes and maximum
loads indicated in the "Programme and
consumption table". When you use additional
chemicals (stain removers, bleachs and etc),
reduce the amount of detergent.
Advertisement
