Advertisement
Available languages
Available languages
4.3.10.2 Functions/Programmes Selected by Pressing
the Function Buttons for 3 Seconds
• Drum Cleaning
To select this programme, press and hold the auxiliary function button 1 for 3 seconds.
Use it regularly (every 1-2 months) to clean the drum and ensure the required hygiene is provided. Run
the programme while the machine is totally empty. To obtain better results, put powder lime-scale
remover for washing machines into the detergent compartment no. "2". When the programme is over,
leave the loading door ajar so that the inside of the machine gets dry.
C
.This is not a washing programme. It is a maintenance programme
Do not run this programme when there are any objects in the machine. If you try to do so,
.the machine will automatically detect that there is load inside and abort the programme
• Child Lock
You can prevent children from tampering with the machine by using the Child Lock feature. Thus you can
avoid any changes in a running programme.
C
If the Programme Selection knob is turned when the Child Lock is enabled, "Con" appears on the
display. While the Child Lock is enabled, you cannot make any change in the programmes, the selected
temperature, the speed or the auxiliary functions.
Even if another programme is selected with the Programme Selection knob while the Child Lock is enabled,
previously selected programme will continue running.
To enable Child Lock:
Press and hold the Auxiliary Function button 2 for 3 seconds. While you're holding the
button pressed for 3 seconds, C03, C02 and C01 will be displayed respectively.Then, "Con"
will be displayed to warn the user that child lock is enabled.If you press any button or turn
the Programme Selection knob while the Child Lock is enabled, the same warning will be
displayed.
To disable Child Lock:
Press and hold the Auxiliary Function button 2 for 3 seconds while the programme is running. While
you're holding the button pressed for 3 seconds, C03, C02 and C01 will be displayed respectively. Then,
"COF" will be displayed to warn the user that child lock is disabled.
C
In addition to the method above, to deactivate the Child Lock, switch the Programme Selection knob to On/
Off position when no programme is running, and select another programme.
Child Lock will not be disabled after a power failure or unplugging.
• Anti Crease+
If you press and hold the auxiliary function button 3 for 3 seconds, this function will be selected
and the programme follow-up light of the relevant programme will turn on. When this function is
selected, the drum will rotate for up to eight hours to ensure that the clothes do not crease at the end
of the programme. At any time during these eight hours, you can cancel the programme and unload
the machine. Just press any button or turn the programme selection knob to end the function. The
programme follow-up light will remain on even if you end the function by pressing any button. If you end
the function by turning the programme selection knob, the programme follow-up light will remain on or
go off depending on the selected programme. If you do not cancel the function by pressing the Auxiliary
Function button 3 for 3 seconds, it will be used in the next washing cycles as well.
48 / EN
Advertisement
