Using Smart Diagnosis - LG WTG9034 F Series Owner's Manual

Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to
you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to opensource@lge.com. This offer is valid for a
period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of
this information.
Smart Diagnosis Using a
Smartphone
This feature is only available on the model with
or d logo.
Use this function if you need an accurate diagnosis
by an LG Electronics customer information centre
when the appliance malfunctions or fails.
This function can not be activated unless the
appliance is connected to power. If the appliance is
unable to turn on, then troubleshooting must be
done without using this function.

Using Smart Diagnosis

Smart Diagnosis Through the
Customer Information Centre
Use this function if you need an accurate diagnosis
by an LG Electronics customer information centre
when the appliance malfunctions or fails. Use this
function only to contact the service representative,
not during normal operation.
1
Press the POWER button to turn on the
appliance.
• Do not press any other buttons.
2
When instructed to do so by the call centre,
place the mouthpiece of your phone close to
the Smart Diagnosis icon.
3
Press and hold the Cold Wash button for 3
seconds.
4
Keep the phone in place until the tone
transmission has finished. Time remaining for
data transfer is displayed.
• For best results, do not move the phone
while the tones are being transmitted.
• If the call centre agent is not able to get an
accurate recording of the data, you may be
asked to try again.
c
5
Once the countdown is over and the tones
have stopped, resume your conversation with
the call centre agent, who will then be able to
assist you using the information transmitted
for analysis.
NOTE
• This function depends on the local call quality.
• The communication performance will improve
and you can receive better service if you use the
home phone.
• If the data transfer is poor due to poor call
quality, you may not receive the best diagnosis
service.
SMART FUNCTIONS 29 EN