Table of Contents
Advertisement
EN
28
SMART FUNCTIONS
Wi-Fi Function
You can communicate with the appliance from a
smartphone using the convenient smart features.
Washer Cycle (Remote Start, Download Cycle)
Set or download any preferred cycle and operate
by remote control.
Tub Clean Coach
This function shows how many cycles remain
before running the Tub Clean function.
Energy Monitoring
This function checks the energy consumption of
the recently used cycles and monthly average.
Smart Diagnosis
This function provides useful information for
diagnosing and solving issues with the washing
machine based on the pattern of use.
Settings
Various functions are available.
Push Alert
This function is to inform the status notification so
that so that the user can recognize the appliance
status. The notifications are triggered even if the
LG SmartThinQ application is off.
NOTE
• If you change your wireless router, Internet
service provider, or password, delete the
registered appliance from the LG SmartThinQ
application and register it again.
• The application is subject to change for the
purpose of improving the appliance without
notice to users.
• Functions may vary by model.
Using the Appliance Remotely
Remote Start
Use a smartphone to control your appliance
remotely. You can also monitor your cycle
operation so you know how much time is left in the
cycle.
Using This Function
1
Press the POWER button.
2
Put the laundry into the drum.
3
Press and hold Remote Start button for 3
seconds to enable this function.
4
Start a cycle from the LG SmartThinQ
application on your smartphone.
NOTE
• Once this function is enabled, you can start a
cycle from the LG SmartThinQ smartphone
application. If the cycle is not started, the
appliance will wait to start the cycle until it is
turned off remotely from the application or this
function is disabled.
• When this function is turned on, the door is
automatically locked.
Disabling This Function
When this function is activated, press and hold the
Remote Start button for 3 seconds to disable this
function. This function must be turned off, so that
the appliance can be used manually.
Download Cycle
You can download one of many new special cycles
that are not included in the basic cycles on the
appliance.
Appliances that have been successfully registered
can download from a variety of specialty cycles
specific to the appliance.
Only one downloaded cycle can be stored on the
appliance at a time.
Once cycle download is completed in the appliance,
the product keeps the downloaded cycle until a
new cycle is downloaded.
RF Radiation Exposure
Statement
This equipment shall be installed and used at a
minimum distance of 20 cm from the human body.
Advertisement
Table of Contents
