Optoma EH415ST User Manual page 57

User Controls
56
6. Fill in the IP address and Subnet mask, then press OK.
7. Press the Menu button on the projector.
8. Select OSD-> SETUP-> Network Settings-> Lan Settings.
9. After getting into Network Status, input the following:
DHCP: Off

IP Address: 10.10.10.10

Subnet Mask:

Gateway: 0.0.0.0

DNS: 0.0.0.0

10. Press "ENTER" / ► to confirm settings.
11. Open a web browser (ex, Microsoft Internet Explorer with Adobe
Flash Player 9.0 or higher).
12. In the Address bar, input the IP address: 10.10.10.10.
255.255.255.0