Setup | Lan Settings - Optoma EH415ST User Manual

User Controls
N N
ote ote
Network sub-menu
can only be accessed
if a network cable is
connected.
42
If the connection is successful, the OSD display will show the
following dialogue box.
Network State—to display network information.

DHCP:

On: Assign an IP address to the projector from the DHCP
server automatically.
Off: Assign an IP address manually.
IP Address—Select an IP address

Subnet Mask—Select subnet mask number.

Gateway—Select the default gateway of the network connected

to the projector.
DNS—Select DNS number.

Apply—Press "ENTER" to apply the selection.

MAC Address—Read only.


Setup | LAN Settings