Table of Contents
Advertisement
TroublesHooTInG
nothing is displayed on the screen.
Is the monitor's power cord plugged in?
Is the monitor's adapter plugged in?
Is the power LED on?
Is the power on and the power LED displaying red?
Is the The screen is not currently set to the
recommended resolution. If you have no video
or the screen flickers, see the troubleshooting
guide in the product owner's manual. message
being displayed?
Is the no signal message being displayed?
Did you check your version of Windows OS?
screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails.
Did you select the appropriate resolution?
•
Check if the power cord is correctly plugged into the power outlet.
•
Make sure to use the adapter that is provided in the product package
•
Check the power cable connection and press the power button.
Check that the connected input is enabled (settings > Input).
•
•
This occurs when signals transferred from the PC (graphics card) are out of the recommended horizontal or
vertical frequency range of the monitor. Please see the Product Specification section of this manual to set the
appropriate frequency.
•
This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the
cable and reconnect it.
•
It is recommended that at least Windows OS version 10 should be installed.
•
If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the
resolution to 1080p or the recommended resolution.
•
Not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed
screen, a truncated display area or misalignment of the display.
•
The setting methods may be different depending on the computer or operating system, and some resolutions
may not be available depending on the performance of the graphics card. If this is the case, contact the
manufacturer of the computer or graphics card for assistance.
27
Advertisement
Table of Contents
