TRAINING MANUAL Copyright ⓒ 2019 LG Electronics Inc. All rights reserved. Only training and service purposes.
Page 14
Display Audio and can adjust Output Volume in bottom side Windows impossible. Select the Speaker Icon in Windows Tray, and then select LG UltraFine Display Audio for adjusting the Volume Copyright ⓒ 2019 LG Electronics Inc. All rights reserved. Only training and service purposes.
Page 15
1) Checking the symptom: To guide the customer that they need to check the Apple Device List in Apple website. And it may caused by TBT2 to 3 Adapter or Apple Devieces. Copyright ⓒ 2019 LG Electronics Inc. All rights reserved. Only training and service purposes.
Page 16
Because the 2015 PC has a low NVM version, it may cause compatibility problems with monitors. From the desktop icon tray, Bottom left, select “information” Right-click above ICON and select "Settings" Copyright ⓒ 2019 LG Electronics Inc. All rights reserved. Only training and service purposes.
Page 17
USB device (or USB HUB) must be connected to the USB expansion port for normal operation. <24MD4KL> <27MD5KL> Thunderbolt input port Thunderbolt input port USB expansion port USB expansion port Copyright ⓒ 2019 LG Electronics Inc. All rights reserved. Only training and service purposes.
Page 18
2nd monitor in Daisy Chain is recommended to use the 24MD4KL model whenever possible.(Guide that problems may occur Monitor (24MD4KL) Monitor (24MD4KL) when using other models) Thunderbolt input port Thunderbolt input port PC (Mac Device Recommended) USB expansion port USB expansion port Copyright ⓒ 2019 LG Electronics Inc. All rights reserved. Only training and service purposes.
Page 19
The reason why there are the two Thunderbolt input ports is for the Daisy Chain function. 24MD4KL 썬더볼트 입력 Port PC #1 PC #2 USB expansion port Copyright ⓒ 2019 LG Electronics Inc. All rights reserved. Only training and service purposes.
Page 20
Tool Size (if applicable) Screw driver Plastic stick Jig * Disassemble Process ① Place Set on the table. ② Remove the stand by operating the stand release button. Copyright ⓒ 2019 LG Electronics Inc. All rights reserved. Only training and service purposes.
Page 21
③ Remove the screw 4EA. ⑤ Detach Bottom → Left, Right → CA/BC using plastic jig ⑥ Rear shield + Remove the module tightening screw 10EA. Copyright ⓒ 2019 LG Electronics Inc. All rights reserved. Only training and service purposes.
Page 22
⑨ Remove the ALS sensor from the top of the module after separating the CA from the module. ⑩ Removing Screw 15EA, separate Main/Power/ Temperature sensor/Fan Copyright ⓒ 2019 LG Electronics Inc. All rights reserved. Only training and service purposes.
Page 23
24MD4KL Disassembly process Temp. sensor Power Board Sub board Shield Bottom bracket Rear shield Assy Main Board Speaker ⑪ DMS chassis disassemble picture Copyright ⓒ 2019 LG Electronics Inc. All rights reserved. Only training and service purposes.