Specifications; Intended Use - Makita DGA506ZJ Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n)
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

Intended use

The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Model DGA406
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
Model DGA456
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
Model DGA506
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
With battery cartridge
BL1815N, BL1820, BL1820B
With battery cartridge BL1830,
BL1830B, BL1840, BL1840B,
BL1850, BL1850B, BL1860B
With battery cartridge
BL1815N, BL1820, BL1820B
With battery cartridge BL1830,
BL1830B, BL1840, BL1840B,
BL1850, BL1850B, BL1860B
) : 80 dB(A)
pA
) : 79 dB(A)
pA
) : 79 dB(A)
pA
DGA406
100mm (4")
M10
2.2kg
2.5kg
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model DGA406
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: surface grinding with anti vibration side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding with normal side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding with anti vibration side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DGA456
Work mode: surface grinding with normal side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
6 ENGLISH
DGA456 DGA506
115mm (4-1/2") 125mm (5")
6.4mm
M14 or 5/8" (country specific)
-1
8,500min
348mm
362mm
2.3kg
2.6kg
D.C. 18 V
2
) : 4.5 m/s
h, AG
2
2
) : 4.0 m/s
h, AG
2
2
) : 2.5 m/s or less
h, DS
2
2
) : 2.5 m/s or less
h, DS
2
2
) : 6.5 m/s
h, AG
2