Advertisement
EnGlIsh
Introduction
You can use the filter to obtain extra finely blended sauces, fresh fruit juices
or cocktails. All pips and skins are caught in the filter.
This filter is suitable for Philips blender types HR2074, HR2071, HR2069,
HR2067, HR2066, HR2064, HR2063 and HR2061.
Important
Read this user manual carefully before you use the filter and save it for
future reference.
Caution
-
Never use the filter to process ingredients hotter than 80°C.
-
Never overload the filter. Do not fill the filter beyond its metal part.
-
Always make sure the blender lid is closed/assembled properly and the
stopper is inserted properly in the lid before you switch on the blender.
-
Cut fruit into smaller pieces before you put it in the filter.
-
Soak dried ingredients, such as soy beans, before you put them in the
filter.
Before first use
, Thoroughly clean the filter before you use it for the first time (see
chapter 'Cleaning').
Preparing the filter for use
1
Assemble the blender jar onto the motor unit as described in the
blender user manual.
2
Put the filter in the blender jar (Fig. 1).
Make sure that the filter is placed properly on the bottom of the jar.
The grooves of the filter and the ribs inside the blender jar help you put the
filter in the right position.
3
Blender types HR2069/HR2067/HR2066/HR2064/HR2063/HR2061:
Close the lid of the blender jar (Fig. 2).
4
HR2074/HR2071: put the lid on the blender jar to fix the filter in its
proper position. To fasten the lid, press it down and turn it (Fig. 3).
Make sure that the sieve in the lid is positioned in front of the spout of the
jar to be able to pour out liquids.
Using the filter
Never use the filter to process ingredients hotter than 80°C.
Using the filter
1
Put the ingredients in the filter through the opening in the lid (Fig. 4).
Do not fill the filter beyond its metal part.
Cut fruits into smaller pieces and soak dried pulses, such as soy beans,
before you process them in the filter.
2
Add water or another liquid.
3
Put the stopper in the lid, set the blender to the highest speed and let
it run for max. 40 seconds.
4
Switch off the blender. Pour out the drink through the spout of the
blender jar (Fig. 5).
Make sure the lid of the blender jar is closed and the stopper is in the lid.
This prevents pulp and skins from ending up in your drink.
5
For optimal results, put the blender jar with the remaining ingredients
back onto the motor unit, without opening/removing the lid, and let
the blender operate for a few more seconds.
6
Pour out the rest of the drink.
Tips
-
Particularly when you process large quantities, we advise you not to put
all the ingredients in the filter at the same time. Start processing a small
quantity, let the appliance run for a moment, switch it off and then add
another small quantity.
-
To get the best result when you make fruit juices and cocktails, add
approx. 300ml water (or another liquid if you are making e.g. cocktails)
to 150g fruit.
Cleaning
Always unplug the blender before you clean the filter.
Do not use abrasives, scourers or liquids such as alcohol, petrol or
acetone to clean the filter.
1
Remove the filter from the blender jar.
2
Hold the filter over a dustbin and gently shake out the contents.
3
Rinse the filter under the tap.
Tips:
-
Cleaning the filter is easiest immediately after use.
-
If necessary, you can clean the mesh of the filter with a very soft brush.
Guarantee and service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone number in the worldwide
guarantee leaflet). If there is no Consumer Care Centre in your country, go
to your local Philips dealer.
IndonEsIa
Pendahuluan
Anda dapat menggunakan saringan untuk mendapatkan saus, jus buah segar
atau coktail yang ekstra lembut. Semua biji dan kulit akan tersaring.
Saringan ini cocok untuk jenis blender Philips HR2074, HR2071, HR2069,
HR2067, HR2066, HR2064, HR2063 dan HR2061.
Penting
Baca petunjuk pengguna ini dengan seksama sebelum menggunakan saringan
dan simpanlah sebagai referensi nanti.
hati-hati
-
Jangan sekali-kali menggunakan saringan untuk mengolah bahan yang
lebih panas dari 80 °C.
-
Jangan berlebihan mengisi saringan. Jangan mengisi saringan melebihi
bagian logamnya.
-
Pastikan selalu tutup blender dirapatkan/terpasang dengan benar dan
penghentinya dimasukkan dengan benar dalam tutupnya sebelum Anda
menghidupkan blender.
-
Potong buah menjadi kecil-kecil sebelum menaruhnya dalam saringan.
-
Rendam bahan makanan kering, seperti kacang kedelai, sebelum
memasukkannya ke dalam saringan.
sebelum menggunakan alat pertama kali.
, Bersihkan saringan dengan seksama sebelum menggunakannya untuk
pertama kali (lihat bab 'Membersihkan).
Menyiapkan saringan untuk penggunaan
1
Pasang tabung blender pada unit motor seperti yang diterangkan
dalam petunjuk pengguna blender.
2
Letakkan saringan dalam tabung blender (Gbr. 1).
Pastikan saringan telah dipasang dengan benar pada bagian bawah tabung.
Alur pada saringan dan sirip di dalam tabung blender membantu Anda
memasang saringan dalam posisi yang benar.
3
Jenis blender HR2069/HR2067/HR2066/HR2064/HR2063/HR2061:
Rapatkan tutup tabung blender (Gbr. 2).
4
HR2074/HR2071: Pasang tutupnya pada tabung blender untuk
memperbaiki posisi saringan. Untuk mengencangkan tutupnya, tekan
dan putar (Gbr. 3).
Pastikan ayakan dalam tutupnya dipasang di depan cerat tabung agar bisa
menuang isinya.
Menggunakan saringan
Jangan sekali-kali menggunakan saringan untuk mengolah bahan yang lebih
panas dari 80 °C.
Menggunakan saringan
1
Masukkan bahan-bahan ke dalam saringan melalui lubang pada
tutupnya (Gbr. 4).
Jangan mengisi saringan melebihi bagian logamnya.
1
5
2
3
4
Advertisement
