Toasting Bread - Philips HD2618/99 Manual

Caution
- Do not let the mains cord hang over the edge of the table or worktop on which the
appliance stands.
- Avoid touching the metal parts of the toaster, as they become very hot during toasting.
Only touch the controls and lift the appliance by its handles.
- Do not place the toaster on a hot surface.
- Only connect the appliance to an earthed wall socket.
- Always unplug the appliance after use.
- The toaster is intended for household use only and may only be used indoors. It is not intended
for commercial or industrial use.
- If a slice of bread gets stuck inside the toaster, unplug the appliance and let it cool down before
you try to remove the bread. Do not use a knife or a sharp tool, as these may cause damage to
the heating elements.
- The warming rack is only intended for warming up rolls or croissants. Do not put any other
ingredients on the warming rack, as this may lead to a hazardous situation.
electromagnetic fields (eMF)
This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
Before first use
1 Remove any stickers and wipe the body of the toaster with a damp cloth.
2 Put the toaster in a properly ventilated room and select the highest browning setting.
3 Let the toaster complete a few toasting cycles without bread in it.
This burns off any dust that may have accumulated on the heating elements and prevents unpleasant
smells during toasting.
using the appliance
Never let the toaster operate unattended.
1 To adjust the length of the cord, wind part of it round the brackets in the base of the
appliance (Fig. 2).
2 Put the appliance on a stable and flat surface, away from curtains and other combustible
materials.
3 Put the plug in the wall socket.

toasting bread

1 Put one or two slices of bread in the toaster (Fig. 3).
2 To select the toasting mode 7, press the mode button until 7 appears on the display.
Depending on the previously selected mode, you have to press the mode button once or
several times. (Fig. 4)
3 Select the desired browning setting. (Fig. 5)
Select a low setting for lightly toasted bread and a high setting for darkly toasted bread.
- Press the - button once or several times to select a lower setting for lighter toast.
- Press the + button once or several times to select a higher setting for darker toast.
The display shows the selected setting.
,
EnglisH
7