Toasting Bread - Philips HD2647 User Manual

- Always unplug the appliance after use.
- The toaster is intended for household use only and may only be used indoors. It is not intended
for commercial or industrial use.
- If a slice of bread gets stuck inside the toaster, unplug the appliance and let it cool down before
you try to remove the bread. Do not use a knife or a sharp tool, as these may cause damage to
the heating elements.
- HD2627 only: The warming rack is only intended for warming up rolls or croissants. Do not put
any other ingredients on the warming rack, as this may lead to a hazardous situation.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
Before first use
Remove any stickers and wipe the body of the toaster with a damp cloth.
Before you use the appliance for the first time, we advise you to let the appliance complete a few
toasting cycles without slices of bread on the highest browning setting in a properly ventilated room.
This burns off any dust that may have accumulated on the heating elements and prevents
unpleasant smells when toasting bread.
using the appliance
1 Put the appliance on a stable and flat surface, away from curtains and other combustible
materials. Put the plug in the wall socket.
 To adjust the length of the cord, wind part of it round the brackets in the base of the
appliance (Fig. 2).

toasting bread

Never let the toaster operate unattended.
1 Put one or two slices (HD2627) or one to four slices (HD2647) of bread in the toaster
(Fig. 3).
Tip: For the best toasting results, always put the slices in the centre of the slots.
 Select the desired browning setting (Fig. 4).
- Select a low setting (1-2) for lightly toasted bread and a high setting (5-7) for darkly toasted
bread.
- HD2647: If you only toast one or two slices of bread, select the desired browning setting for the
side where you put the bread. If you toast three or four slices of bread, select the desired
browning settings for both sides of the appliance.
 Push down the toasting lever to switch on the appliance (Fig. 5).
- HD2647: If you only toast one or two slices of bread, push down the toasting lever of the side
where you put the bread. If you toast three or four slices of bread, push down both toasting
levers.
- The toasting lever only stays down when the appliance is connected to the mains.
The stop button lights up (Fig. 6).
,
Caution: The metal parts of the toaster become hot during toasting. Do not touch them.
Note: You can stop the toasting process and pop up the bread at any time by pressing the stop button on
the toaster.
 To adjust the browning setting during toasting, turn the browning control.
EnglisH
7