Philips HD2618/99 Manual page 10

Philips toaster hd2618 1000 w
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
EnglisH
10
Problem
The toaster does not
work.
Bread gets stuck in the
appliance.
The toast is too dark/
too light.
Smoke comes out of
the toaster.
The mains cord is
damaged.
One side of the bread
is not toasted.
I cannot change the
browning level when I
use the warming
mode or reheat mode.
Only one side of my
roll or croissant is
warm.
The display of the
toaster continues to
flash or remains on.
Solution
Make sure the plug is properly inserted into the wall socket.
Perhaps the sleep mode is active. Press any button to deactivate the
sleep mode.
Perhaps the electronic system of the toaster is defective. Have the
toaster examined and repaired or replaced by Philips or a service centre
authorised by Philips.
Unplug the appliance and let it cool down. Carefully remove the slice or
slices from the toaster. Take care not to damage the heating elements
when you remove the slice or slices of bread. Never use a metal object
for this purpose.
Select a lower setting next time if your toast is too dark and a higher
setting if your toast is too light.
You have chosen a too high setting for the type of bread inserted. Press
the stop button to stop the toasting process.
If the mains cord of this appliance is damaged, you must have it replaced
by Philips, a service centre authorised by Philips or similarly qualified
persons in order to avoid a hazard.
You have selected the one-side toasting mode. To toast the other side as
well, put the bread in the slot with the untoasted side facing the front of
the toaster. Then follow the instruction in section 'Toasting one side only'.
To warm up rolls and croissants and to reheat toasted bread, the toaster
operates at fixed settings to ensure an optimal end result.
On the warming rack, only one side of the roll or croissant is warmed.
Turn your roll or croissant and warm it up again. Follow the instructions
in 'Warming up rolls and croissants'.
Remove the plug from the wall socket and then reinsert it. If the display
continues to flash, the electronic system is probably defective. In this
case, have the toaster examined and repaired or replaced by Philips or a
service centre authorised by Philips.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hd2618/00Hd2618/01Hd2618

Table of Contents