Time Screen - ZyXEL Communications NWA1120 Series User Manual

Chapter 11 Maintenance

11.6 Time Screen

Use this screen to change your NWA's time and date, click Maintenance > Time. The following
screen displays.
Figure 61 Maintenance > Time
The following table describes the labels in this screen.
Table 36 Maintenance > Time
LABEL
Current Time and Date
Current Time
Current Date
Time and Date Setup
NTP Client Update
NTP server
Manual IP
Time Zone Setup
Time Zone
Apply
Cancel
118
DESCRIPTION
This field displays the time of your NWA.
Each time you reload this page, the NWA synchronizes the time with the time server
(if configured).
When you disable NTP Client Update, you can manually enter the new time in this
field and then click Apply.
This field displays the last updated date from the time server.
When you disable NTP Client Update, you can manually enter the new date in this
field and then click Apply.
Select this to have the NWA get the time and date from the time server you
specified below.
Select this option to use the predefined list of Network Time Protocol (NTP) servers.
Select an NTP server from the drop-list box.
Select this option to enter the IP address or URL of your time server. Check with
your ISP/network administrator if you are unsure of this information.
Choose the time zone of your location. This will set the time difference between
your time zone and Greenwich Mean Time (GMT).
Click Apply to save your changes.
Click Cancel to reload the previous configuration for this screen.
NWA1120 Series User's Guide