Wireless Client Mode - ZyXEL Communications NWA1120 Series User Manual

Chapter 6 Wireless LAN

6.4.3 Wireless Client Mode

Use this screen to turn your NWA into a wireless client. Select Client as the Operation Mode. The
following screen displays.
Figure 24 Wireless LAN > Wireless Settings: Wireless Client
The following table describes the general wireless LAN labels in this screen.
Table 13 Wireless LAN > Wireless Settings: Wireless Client
LABEL
Basic Settings
Wireless LAN
Interface
Operation Mode
Site Survey
68
DESCRIPTION
Select the check box to turn on the wireless LAN on the NWA.
Select Client in this field.
Click this to view a list of available wireless access points within the range. Select the AP
you want to use.
Note: After selecting Client as the Operation Mode in the Basic Settings section, you must
click Apply to be able to select from the AP list.
NWA1120 Series User's Guide