The Profile Screen - ZyXEL Communications G210H User Manual

Table 8 Station Mode: Security Settings: IEEE 802.1x
LABEL
PEAP Inner EAP
Validate Server
Certificate
Certificate Issuer
Must Be
Server Name Must
Be
Back
Save
Exit

4.4 The Profile Screen

A profile is a set of wireless parameters that you need to connect to a wireless network. With a
profile activated, each time you start the G-210H, it automatically scans for the specific SSID
and joins that network with the pre-defined wireless security settings. If the specified network
is not available, the G-210H cannot connect to a network.
If you do not configure and activate a profile, each time you start the G-210H, the G-210H
uses the default profile to connect to any available network that has no security enabled.
The default profile is a profile that allows you to connect to any SSID that has no security
enabled.
Click the Profile tab in the ZyXEL utility program to display the Profile screen as shown next.
The profile function allows you to save the wireless network settings in this screen, or use one
of the pre-configured network profiles.
Chapter 4 Wireless Station Mode Configuration
DESCRIPTION
This field is only available when you select PEAP in the Authentication Type field.
The PEAP method used by the RADIUS server or AP for client authentication is
MS CHAP v2.
Check this box to open up the rest of the Certificate selection menu.
From the drop down menu, please select the appropriate certificate issuer or if you
are uncertain, then select Any Trusted CA
You must specify the name of the server that the certificate is connecting to.
Please type in the server name and then select the appropriate bullet below when
finished typing the name in.
Click Back to go to the Site Survey screen to select and connect to another
network.
Click Save to confirm your selections and advance to the next screen. Refer to
Section 4.3.2 on page 47.
Click Exit to return to the Site Survey screen without saving.
ZyXEL G-210H User's Guide
41