30
en | Troubleshooting
No audio
transmission to
remote station.
The unit does
not report an
alarm.
2016.06 | v1.0 | AM18-Q0710
Hardware fault.
Faulty cable
connections.
Incorrect
configuration.
The audio voice
connection is already
in use by another
receiver.
Alarm source is not
selected.
No alarm response
specified.
FLEXIDOME IP starlight
Check that all
connected audio
units are operating
correctly.
Check all cables,
plugs, contacts and
connections.
Check audio
parameters on the
Audio configuration
and LIVE page
functions pages.
Wait until the
connection is free
and then call the
sender again.
Select possible alarm
sources on the Alarm
sources configuration
page.
Specify the desired
alarm response on
the Alarm
connections
configuration page; if
necessary change the
IP address.
Bosch Security Systems
7000 VR