Bosch FLEXIDOME IP starlight 7000 VR Installation Manual page 28

28 en | Configuration
7 Configuration
The camera normally provides an optimal picture without the
need for further adjustments. However, you can use a web
browser via the network to access a menu to change camera
settings such as user modes, passwords, picture settings and
network settings.
Configuration options using the menu system on the camera
itself are limited to basic setup via the Wizard.
1.
2.
3.
4.
If required, configure the parameters in other menus to suit your
working environment (for example, ID, passwords, date and
time). Refer to the operation manuals of the software for more
information.
2016.06 | v1.0 | AM18-Q0710
Open the camera in the web browser.
Click Configuration in the title bar.
Select Camera >> Installer Menu from the side bar.
Select the application variant before any other changes are
made, as the camera reboots automatically and resets the
factory defaults when the application variant is changed.
FLEXIDOME IP starlight
7000 VR
Bosch Security Systems