Fig. 69: Installing Gas Outlet Casing With Support 1; Table 48: Tightening Torque (51009) - ABB HT599244 Operation Manual

Operation Manual / 4 Product description / A150-M58/68
9 Dismantling and fitting with removed air inlet and gas outlet / 9.19
Installing the gas outlet casing
Variant with support
Fig. 69: Installing gas outlet casing with support 1
Product Size Tightening torque [Nm]
A150-M58/68 M16 200
Table 48: Tightening torque (51009)
1. Coat thread of bolts (51008) with high-temperature grease.
2. Insert a new gasket (61002) into the gas outlet casing (61001).
3. Fit swivel lifting eyes (S) to gas outlet casing (61001). Secure lifting gear to the swivel lift-
ing eye.
4. Place gas outlet casing on the turbine casing (51000). Observe the marking.
5. Fit support (61301).
6. Fit hexagon nuts (51009). Observe the tightening torque.
© Copyright 2020 ABB. All rights reserved. HZTL4041_EN Rev.D March 2020