Table 43: Tightening Torque (51007) - ABB HT599244 Operation Manual

Operation Manual / 4 Product description / A150-M58/68
9 Dismantling and fitting with removed air inlet and gas outlet / 9.12
Installing the cartridge group
Fig. 59: Installing the cartridge group
Product Size Tightening torque [Nm]
A150-M58/68 M16 175
Table 43: Tightening torque (51007)
8. Coat the threads of the studs (51006) with high-temperature grease.
9. Align casing position of cartridge group with marking and lower into the turbine casing.
10. Remove lifting gear cross-piece of service support.
11. Install the fastening strips (51002) with Verbus Ripp® washers (51003) and hexagon
nuts (51007). Observe the tightening torque.
© Copyright 2020 ABB. All rights reserved. HZTL4041_EN Rev.D March 2020