Operation Manual / 4 Product description / A150-M58/68
9 Dismantling and fitting with removed air inlet and gas outlet / 9.13
Installing the compressor casing
Installing the compressor casing
Fig. 61: Installing the compressor casing
Product
Size
Tightening torque [Nm]
A150-M58/68
M16
275
Table 45: Tightening torque (72011)
1. Fit new O-ring (42012).
2. Thoroughly clean the fastening strips (72012) before assembly.
3. Install the compressor casing (72000).
4. Install the fastening strips (72012) with screws (72011). Observe the tightening torque.
© Copyright 2020 ABB. All rights reserved.
HZTL4041_EN
Rev.D
March 2020