Installing The Gas Outlet Casing; Fig. 68: Fitting Gas Outlet Casing Without Support; Table 47: Tightening Torque (51009) - ABB HT599244 Operation Manual

Operation Manual / 4 Product description / A150-M58/68
9 Dismantling and fitting with removed air inlet and gas outlet / 9.19

Installing the gas outlet casing

9.19 Installing the gas outlet casing
Variant without support
Fig. 68: Fitting gas outlet casing without support
Product
A150-M58/68
Table 47: Tightening torque (51009)
1. Coat thread of bolts (51008) with high-temperature grease.
2. Insert a new gasket (61002) into the gas outlet casing (61001).
3. Fit swivel lifting eyes (S) to the gas outlet casing (61001). Secure lifting gear to the swivel
lifting eye.
4. Place gas outlet casing at turbine casing (51000). Observe the marking.
5. Fit hexagon nuts (51009). Observe the tightening torque.
6. Fit insulation ring. Observe tightening torques (see
7. If present: Attach waste gate pipe. Tighten in accordance with enginebuilder's specifica-
tions.
© Copyright 2020 ABB. All rights reserved.
Size
M16
Table of tightening torques
HZTL4041_EN
Tightening torque [Nm]
200
→72).
Rev.D March 2020