Chapter 2. Nvr Installation; System Requirements - Brickcom NR-2108 User Manual

Chapter 2. NVR Installation

System Requirements

The following information is the minimum level of system requirements for a
personal computer to operate NVR in better performance:

Operating System
Microsoft® Windows® Vista /7 / 8 (32-bit and 64-bit)
Browser

Microsoft® Internet Explorer 8.0 or above (32-bit)

CPU
For channels under 16 : Intel® Dual core CPU 3.0 GHz or above.
For channels over 16 : Intel® i5/i7 CPU 3.3 GHz or above.
 Network
Minimum 10/100 Ethernet (Gigabit Ethernet is recommended)
Note: * User is suggested to connect cameras and NVR with Gigabit
switch.
 Memory
For channels under 16: DDR3 4G or above.
For channels over 16: DDR3 8G or above
 Graphics Adapter
AGP or PCI-Express, minimum 1024×768, 16 bit colors, 1G memory or
above
Note: It is highly recommended to use a graphics adaptor which provides
higher than resolutions 1024 x 768 in order to experience the full
benefits of the software.

Make sure the display DPI setting is set to default at 96DPI
 To set DPI value, right-click on desktop, choose "Settings" tab >>
"Advanced" >> "General."
 CD-ROM Drive
It is necessary to read the operating instructions in the provided
CD-ROM.
 Adobe Reader
It is necessary to read the operating instructions in the provided CD-ROM.
The audio function will not work if a sound card is not installed in the PC.
Audio may be interrupted depending on network traffic.
10