Cleaning And Maintenance - Krups XP320050 Manual

English
n Then turn the dial to the
outside of the steam nozzle with a clean cloth.
For thorough cleaning of the steam nozzle, see Section 7, "Cleaning of
the steam Nozzle".

7. CLEANING AND MAINTENANCE

O F T H E A P P L I A N C E :
n Make sure the coffee machine is unplugged and completely cooled
down before you begin to clean it.
n The removable parts can be cleaned using a cloth and gentle
washing-up liquid and water.
n Do not immerse the coffee machine in water or any other liquid.
O F T H E F I LT E R H O L D E R H O U S I N G :
n Using a damp cloth, regularly clean the filter holder housing in order to
remove any coffee residue which may be stuck there.
n To prolong the life of the percolation head gasket seal, do not put the
filter holder back into place if the coffee machine is not to be used for
a long time.
O F T H E S T E A M N O Z Z L E :
n Regularly remove the plastic accessory of the steam nozzle (k)
(Fig. 16) and rinse it.
n To unblock the hole in the steam nozzle outlet, you may use a needle.
O F T H E D R I P T R AY :
n The drip tray must be emptied after each time the appliance is used.
n If multiple espressos are prepared one after another, it should be
emptied from time to time (every 6 cups of espressos approximately)
(fig.17).
n The presence of water is normal and is not the sign of a leak. If
necessary, clean the drip tray (m) and its grid (l) with water and a
little gentle washing-up liquid, rinse and dry.
n Make sure the drip tray is put back into place properly (fig. 18).
Caution! Do not put any of these parts into the dishwasher.
14
O
(i1) (fig. 15) position and wipe the