Krups XP320050 Manual page 14

English
n After 15 minutes, turn the machine back on.
n Let the rest of the water run through until the water tank is empty.
n Then turn the dial to the
R I N S I N G
IMPORTANT!
After descaling, rinse 2-3 times with clean water as des-
cribed in Section 4 "BEFORE FIRST USE". Then rinse
the steam nozzle by following the instructions below:
n Fill the water tank with clean water. Then place a container under the
steam nozzle.
n Press the "on/off" button to turn the machine on, and then
immediately turn the dial to the
stopping at the
n Let the water run through the nozzle until steam appears.
n Turn the dial back to the
The machine is now descaled and ready to be used again.
16
(h1). position.
(i2)position.
O
(i1) (fig. 15) position.
(i3) (fig. 13)position, without