Table of Contents
Advertisement
Before Using for the First Time
A display test is carried out for 10 seconds after the
appliance has been installed and after a power cut. The fan
comes on at the same time. The appliance cannot be used
during this time.
Cleaning and Heating up for the First Time
^ Remove any protective foil and sticky labels.
^ The rack from the drawer, and sponge both with warm
water and a little washing-up liquid. Dry using a soft cloth.
^ Wipe the appliance inside and out with a damp cloth only,
and then dry with a soft cloth.
^ Then heat the empty drawer for at least two hours.
^ Switch the appliance on by touching the
Please stick the extra data plate for the appliance supplied with
this documentation in the space provided below -
Guide to the Appliance
1. Control panel
To Open: Press the middle of the drawer to open or close it.
When opening, the drawer pops out slightly. You can then pull it out towards you.
Touch the
^
^
Touch the
right lights up.
^ Touch the
^ Close the drawer.
The warming drawer is fitted with a softclose self-closing
mechanism.
It also has a contact switch, which ensures that the
heating element and fan in the appliance only work when
the drawer is closed.
Metal components have a protective coating which may
give off a slight smell when heated up for the first time.
The smell and any vapours will dissipate after a short time,
and do not indicate a faulty connection or appliance.
sensor.
Ensure that the kitchen is well ventilated whilst the
appliance is being heated up for the first time.
6
sensor repeatedly until the LED light.
sensor repeatedly until the LED on the far
sensor repeatedly until 2h lights up.
Advertisement
Table of Contents
