Beverage Length Quick Programming - Saeco HD8944/08 Operating Instructions Manual

BREWING MAY BE PRECEDED BY SHORT SPURTS OF MILK AND STEAM: RISK OF SCALDING! REFER TO THE SECTION
"MILK CONTAINER USE".
This section shows the programming procedure for the Cappuccino. This is meant as an example to introduce you to the steps necessary for
a quick and easy programming of all the beverages.
Each programming applies only for the user currently selected. For other users, it is necessary to repeat the programming procedure.
After a quick programming of the beverage, it is possible to carry out a fi ner and more detailed adjustment by means of the "BEVERAGE
MENU" (see page 24).
1
Place the cup or the container where
the cappuccino or latte macchiato will
be brewed.
4
CAPPUCCINO
FAST
MILK HEATING UP...
ECO MODE ON STOP
MILK
The machine starts brewing: coff ee is
ground and milk is heated up to prepare
for dispensing.
Beverage length has been programmed. From now on, this length will be applied to the brewing of this beverage.
For the other beverages: hold pressed the button of the beverage to be programmed and follow the same procedure.

BeVeraGe lenGtH QUICK ProGrammInG

2
17/05/09
MENU
UTENTE
SELEZIONE
UTENTE
04:17 pm
Rotate the upper part of the container
handle on the cup. Use your everyday
cup.
5
CAPPUCCINO
MEMO
STOP
MILK
Milk dispensing begins. When the
desired quantity has been reached, press
"STOP MILK".
3
MENU
BEVANDA
MENU
MACCHINA
Hold the button pressed for 3 seconds to
start programming.
6
STOP
COFFEE
Once milk has been dispensed, the
machine starts brewing the coffee. When
the desired quantity has been reached,
press "STOP COFFEE".
21
CAPPUCCINO
MEMO