Furuno GP-3700 Operator's Manual page 84

6. ROUTES
7. Select [COMMENT].
8. Enter the comment (see "How to enter alphanumeric data" on page 1-10).
9. Select [RUN] to show [RTE TRN PT LIST].
10. Push the ENTER knob to move the cursor to the waypoints list.
11. Select a waypoint from the waypoint list. The preview for the selected waypoint is
displayed at the bottom right of the screen.
• When 11 or more waypoints are registered, use
• Waypoints are sorted in order of the selected search method. Select [SORT]
then select a search method (see "How to search waypoints by search
method" on page 5-8).
12. Repeat step 11 to complete the route.
6-2
For multiple pages, press
◄ or ► to switch the page.
Preview for the selected
waypoint
or to switch the page.