Using The Software Update Function - Sony VPL-FHZ131L Operating Instructions Manual


The HTML content should be less than 512 MB. HTML
content larger than 512 MB may not be displayed
appropriately.
 Some types of content or the network environment may
affect the connection quality such. For example, loading
may take a longer time.
 The "Auto Power Saving" function is not enabled while
using the HTML viewer (page 31).
 The HTML viewer does not have an interface to work on
the content, such as selecting a button or link displayed
on the content. You cannot close the window, warning
dialog, or authentication message on the content.
Scrolling a window on the HTML viewer is not available.
Set the content size in advance to fit in the window of the
projector.
 Browser extensions, such as plug-in cannot be installed
on the projector.
 The content cannot be displayed if it is encrypted by
protocol such as SSL or TSL.
Setting the time (for the HTML viewer)
You can set the date and time for the HTML viewer.
Use the date and time set in advance for INPUT G
(HTML viewer).
You can set the time in [Manual (Local)] or [NTP
Server].
Date & Time button
Current Date Time: Display the current date
and time by local time.
Setting: Enter the following items to set the
date and time.
-Timezone: Set the time zone. Summer time is
unavailable.
-Use NTP server: Select when obtaining the
time via a network (NTP server).
-NTP Server: Enter the NTP server.
-Status: Display the connection status to the
NTP server.
-latest server data: Display the information
last obtained from the NTP server.
Manual(Local): Select when setting the date
and time manually.
Date(yyyy-mm-dd): Enter the date.
Time(hh:mm:ss): Enter the time.
.

Using the Software Update Function

You can update the software of the projector via
the network.
The update files can be downloaded from the
following Sony website. For details, see "Updating
the Software" (page 52).
Note
You can update the software via a network when Power
status is in STANDBY.
1
Click on [SW Update] to display the SW Update
page.
SW Update button
System Info.: Check the software version.
Power status: Check the power source status
of the projector.
Select File: Select the file to be updated.
45