Table of Contents
Advertisement
Taking Pictures While Adjusting a Setting
Automatically
Applicable modes:
You can take multiple pictures while automatically adjusting a setting by pressing the
shutter button.
1
Select the menu. (P21)
>
MENU
(Exposure Bracket)
(Aperture Bracket)
(Focus Bracket)
(White Balance Bracket)
¢ Available in Aperture-Priority AE Mode or when the ISO sensitivity is set to [AUTO] in
Manual Exposure Mode.
2
Press 3/4 to select [More settings] and then press [MENU/SET].
•
For in formation on [More settings], refer to the page that describes each function.
•
When [
] is selected, rotate the rear dial to the right (A-B axis) or left (G-M axis) to set
the range of settings.
•
Press the shutter button halfway to exit the menu.
3
Focus on the subject and take a picture.
∫ To deactivate Bracket
Select [OFF] in step
(Bracket Recording)
[Rec] > [Bracket] > [Bracket Type]
¢
1
.
Press the shutter button to perform recording while
adjusting the exposure.
Press the shutter button to perform recording while
adjusting the aperture.
Press the shutter button to perform recording while
adjusting the focus position.
Press the shutter button once to take three pictures
with different white balance settings automatically.
Recording
31
(ENG) DVQX1022
Advertisement
Table of Contents
