Accessing The Network Camera; Access The Camera In Lan - Foscam FI9803W User Manual

2 Accessing the Network Camera

This chapter explains how to access the network camera through web browsers and RTSP players.

2.1 Access the Camera in LAN

This camera support HTTP and HTTPS protocols, so here will allow you to use HTTP and HTTPS port No.
(1) Http:// LAN IP + Http Port No.
Double click the IP Camera Tool icon and it should find the camera's IP address automatically after you plug in the
network cable.
Double click the IP address of the camera; your default browser will open to the camera login page.
(2) Https:// LAN IP + Https Port no.
The default Https port no. is 443. You can use the url to access the camera: https:// LAN IP + HTTPS port.
Go to Settings - Network - Port panel , you can see and change the https port no.
HTTPS(Hypertext Transfer Protocol over Secure Socket Layer) is a safe way to access your camera, the data transferred
on the Internet will be encrypted. Since we can not apply license for every LAN or DDNS URL, the webpage may pop
up a warning like the following picture, you just need to click 'Continue to this website (not recommended). '
Shenzhen Shenzhen Foscam Foscam Intelligent Intelligent
Tel: 86 755 2674 5668 Fax:
Tel: 86 755 2674 5668 Fax:
Technology Technology Co., Co., Limited Limited
86 755 2674 5168
86 755 2674 5168
Figure 2.1
Figure 2.2
www www .foscam.co .foscam.co m m
9