Selecting Pictures From 6K/4K Burst File And Saving - Panasonic LUMIX DC-GH5PRO Operating Instructions For Advanced Features

5. 6K/4K Photo and Drive Settings
Selecting pictures from 6K/4K burst file and
saving
This section describes how to select pictures from a 6K/4K burst file and save them.
For information on how to record 6K/4K burst files, refer to P116.
1
Select an image with the [
screen, and press 3.
• You can also perform the same operation by touching the icon [
[ ].
• If the image was recorded with [6K/4K Pre-Burst], proceed to step
2
Drag the slide bar to make a rough selection of
scenes.
• For information on how to use the slide view screen, refer to
P125.
• If the image was recorded with [6K/4K Burst] or [6K/4K
Burst(S/S)], you can select its scenes on the 6K/4K burst
playback screen by touching [
3
Drag the frames to select the frame you want to save
as a picture.
• You can also perform the same operation by pressing 2/
1.
• Touch and hold [
frame-by-frame.
4
Touch [
• A confirmation screen will be displayed.
• The picture will be saved in JPEG format.
• The picture will be saved with recording information (Exif information), including its shutter
speed, aperture and ISO sensitivity information.
Saving pictures taken with the 6K/4K Photo function at once ([6K/4K PHOTO Bulk
∫
Saving])
You can save pictures of a 6K/4K burst file that were extracted from any 5 second period
at once.
1
Select the menu.
>
MENU
2
Press 2/1 to select the 6K/4K photo burst files and press [MENU/SET].
• If the burst time is 5 seconds or less, all frames will be saved as pictures.
3
Select the first frame of the pictures to be saved at once.
• Select the frame in the same way as you select pictures from a 6K/4K burst file.
• Pictures will be saved as a group of Burst Mode pictures in JPEG format.
] or [
] (Fn1).
]/[ ] to continuously rewind/forward
] or [ ] to save the picture.
(P55)
[Playback] > [6K/4K PHOTO Bulk Saving]
] icon on the playback
(P126)
123
] or
3
.
Slide view screen
Fn1 Fn2
(P201)