Xlr Microphone Adaptor (Optional) - Panasonic LUMIX DC-GH5PRO Operating Instructions For Advanced Features

7. Recording Motion Pictures

XLR Microphone Adaptor (optional)

By attaching an XLR microphone adaptor (DMW-XLR1: optional) to the camera, you can
use a commercially-available XLR microphone to enable the recording of superior-quality
high-res/stereo sound.
A Hot shoe
Preparations:
• Turn this unit off.
• Remove the hot shoe cover that is attached to the camera.
Setting the sampling frequency
∫
1
Attach the XLR microphone adaptor to the hot shoe of this unit, and then turn
this unit on.
2
Select the menu.
>
MENU
• This item is available only when using an XLR microphone adaptor.
[96kHz/24bit]
[48kHz/24bit]
[48kHz/16bit]
[OFF]
• The set sampling frequency is also applied to the sound output via HDMI. With [Sound
Down Convert] in [HDMI Rec Output], you can down-convert the sound output via HDMI.
(P191)
• The items below are fixed to the following settings when [XLR Mic Adaptor Setting] is set.
– [Mic Level Adj.]: [OFF]
– [Mic Level Limiter]: [OFF]
• The following menu items are disabled when [XLR Mic Adaptor Setting] is set.
– [Wind Cut]
• When the XLR microphone adaptor is connected, [Mic Level Disp.]
to [ON].
• When a XLR microphone adaptor is attached to the camera, do not hold only the XLR
microphone adaptor to prevent the camera from falling.
• If the noises are recorded when you use an AC adaptor (optional), use a battery.
• For details, refer to the operating instructions of the XLR microphone adaptor.
B XLR microphone adaptor (DMW-XLR1: optional)
C Commercially available XLR microphone
(P55)
[Motion Picture] > [XLR Mic Adaptor Setting]
Records high-res sound at
96 kHz/24bit.
Records high-quality sound at
48 kHz/24bit.
Records standard-quality sound at 48 kHz/16bit.
Records sound using the built-in microphone.
(P153)
Only available when [Rec
Format] is set to [MOV].
– [Lens Noise Cut]: [OFF]
– [Sound Output]: [REC SOUND]
– [Special Mic.]
194
(P170) is automatically set