Panasonic LUMIX DC-GH5S Operating Instructions For Advanced Features page 204

7. Recording Motion Pictures
Applying LUT data to images that are output to an HDMI device
∫
Apply LUT (Look-Up Table) data to images that are output to an HDMI device when [Photo
Style] is set to [V-Log L].
> [Motion Picture] > [HDMI Rec Output] > [LUT HDMI Display]
MENU
Settings: [ON]/[OFF]
• This item is available only when [Photo Style] is set to [V-Log L].
• When the camera is in Playback Mode, this function is applied only to motion pictures recorded
with [V-Log L].
• You can set the LUT data to be applied in [V-LogL View Assist].
Outputting down-converted audio to an HDMI device
∫
When an XLR microphone adaptor (DMW-XLR1: optional) is attached, audio is
down-converted to a format suitable for the connected HDMI device before being output.
> [Motion Picture] > [HDMI Rec Output] > [Sound Down Convert]
MENU
Settings: [AUTO]/[OFF]
• This item is available only when using an XLR microphone adaptor.
• When you use the HDMI output during recording, the image may be displayed with a time lag.
• Electronic sounds and electronic shutter sounds are muted.
• When you check the image and sound from the TV connected to the camera, the microphone
of the camera may pick up the sound from the speakers of the TV, producing an abnormal
sound (audio feedback). If this occurs, move the camera away from the TV or lower the
volume on the TV.
• Certain setting screens are not output via HDMI.
• HDMI output cannot be used in the following cases:
– When recording 4K photos
– When recording with the Post Focus function
(P177)
204