Panasonic LUMIX DC-GH5S Operating Instructions For Advanced Features page 136

5. 4K Photo and Drive Settings
[Start Time]
[Shooting
Interval]/
[Image Count]
• Recording may not be consistent with the set recording interval or the set number of
pictures depending on recording conditions.
3
Press the shutter button halfway to exit the menu.
• The recording screen will be displayed. You can also perform the
same operation by pressing [
displayed.
4
Press the shutter button fully.
• The recording starts automatically.
• During recording standby, the power will turn off automatically if no operation is performed
for a certain period. The Time Lapse Shot is continued even with the power turned off.
When the recording start time arrives, the power turns on automatically.
To turn on the power manually, press the shutter button halfway.
• Operations during recording standby (The camera is turned on)
Button
operation
[Fn1]
• After the recording stops, a confirmation screen will be displayed, asking whether to
proceed to create a motion picture.
To create a motion picture, select [Yes].
For information on creating motion pictures, refer to P139.
∫ Changing the Time Lapse Shot settings
You can change the settings in [Time Lapse/Animation] in the [Rec] menu.
[Now] Starts the recording by fully-pressing the shutter button.
Any time up to 23 hours 59 minutes ahead can be set.
[Start Time 2/1: Select the item (hour/minute)
Set] 3/4: Setting
[MENU/SET]: Set
The recording interval and the number of pictures can be set.
2/1: Select the item (minute/second/number of pictures)
3/4: Setting
[MENU/SET]: Set
] until the recording screen is
Touch
operation
Displays a selection screen that lets you pause or stop
the recording.
Displays a selection screen that lets you resume or
stop the recording (during pause).
Description of operation
136
4:3
AFS AFS
L