Moving The Focus Position Smoothly To A Registered Position ([Focus Transition]) - Panasonic LUMIX DC-GH5S Operating Instructions For Advanced Features

7. Recording Motion Pictures
Moving the focus position smoothly to a registered position ([Focus
Transition])
The camera moves focus from the current position to a pre-registered position.
1
Set the mode dial to [
2
Select the menu.
>
MENU
[POS 1]/[POS 2]/[POS 3]
3
Press [ ].
4
Press 3/4/2/1 to select the focus position and then press [MENU/SET].
5
Set the focus position.
• This is the same operation as Manual Focus operation.
6
Press [MENU/SET].
• To register focus positions to other items, repeat steps
• Set the items below as needed.
[Focus Transition Speed]
[Focus Transition Rec]
[Focus Transition Wait]
7
Press 3/4 to select [Start] and then press [MENU/SET].
• To return to the setting screen, press [DISP.].
8
Press the motion picture button (or shutter button) to
start recording.
• If you have enabled [Focus Transition Rec], Focus
Transition will start when you start recording a motion
picture.
9
Touch [POS 1], [POS 2], or [POS 3] to start Focus
Transition.
• The same operation can be performed by pressing 2/1 to
select the position and pressing [MENU/SET].
• The MF Guide will display the current focus position A and the registered focus position
B.
• To end Focus Transition, press [
10
Press the motion picture button (or shutter button) again to stop recording.
].
[Creative Video] > [Focus Transition] > [Focus Pull Setting] >
Sets the moving speed of focus.
[SH]/[H]/[M]/[L]/[SL]
• Moving speed: [SH] (fast) to [SL] (slow)
Starts Focus Transition when recording starts.
[POS 1]/[POS 2]/[POS 3]/[OFF]
Sets the wait time before the start of Focus Transition.
[10SEC]/[5SEC]/[OFF]
(P102)
2
through
].
185
6
.
POS 1
POS 1 POS 2 POS 3