21. Install rear shuttle insulation (Fig. 23.1) and slide
main housing (Fig. 23.2) onto auger.
22. Secure with three screws.
23. Install shuttle switch.
§ Align holes with pins (Fig. 24.1) and depress switch
button (Fig. 24.2) to clear shuttle tab.
24. Install shuttle drain tube and front feed water tube
(Fig. 25).
Note: Ensure water feed tube is inserted 5/8".
22
Fig. 23
2
Fig. 24
Fig. 25
1
HCD710A, HMD710A