Advertisement
Video Stabilizer Specification Sheet
Video Input
• 1 input channel
• Auto-detect composite PAL or NTSC
• 75 Ohm BNC connector
Video Output
• 1 output channel
• Output automatically adapted to input format
• 75 Ohm BNC connector
Power
• External power supply included
• 12VDC, 1.2A
• DC Power Plug 2.5x5.5x14mm, Center+
Operating Conditions:
• Temperature: 30 – 120°F (0 – 50°C)
• Humidity: 20 – 95%, non-condensing
Dimensions and Mechanics:
• Height:
2.2" (5.5 cm)
• Width:
6.7" (16.9 cm)
• Length:
7.3" (18.5 cm)
• Weight:
2.4 lbs (1.1 kg)
• Finish:
Black powder-coated aluminum
• Protection: Classification IP 65
EMC compliance
• FCC part 15B class A
• EN55022 class A
• EN61000-3-2
• EN61000-3-3
• EN61000-6-2
Power Failure Safe
• All user settings stored in EEPROM
Application Setup
• 12 DIP-switches for parameter selection
• 6-key keypad for control of OSD.
Board Features:
• Equator 300 MHz BSP-15 DSP
• Coprocessor
• 64 MB SDRAM
• 4 MB Flash
• 4 kbit parameter memory
• Video decoder, ITU 656 YUV 4:2:2 format
• Video encoder, ITU 656 YUV 4:2:2 format
• Extension slot
Stabilization Correction
• X/Y correction
• Rotation correction
• Zoom correction
Shake Capture Range Presets
• Small/medium/large
Output Video Latency
• approx. 100 milliseconds
Exclusion Areas
• Default Region of Interest is entire Frame
• Definition of top and bottom frame exclusion
areas (exclude lettering)
Demo Modes
• Picture-in-picture demo mode
• Side-by-side demo mode
• Manual Toggle with front cancel button
Advertisement
